3.3.Mounting the Aluminum Pipe
Place the aluminum pipe on the plastic duct. Place the other end of the pipe
into the air outlet in the kitchen. Figure 2
Twists and bends on the aluminum pipe may cause minimizing the air suction
so avoid unnecessary bends and twists as much as possible. Figure 3-4
Place the inner duct and outer duct carefully on the product. Fix the inner
duct to inner duct connection plate with 2 screws.
Fig 2
Fig 3
Fig 4
3.4.Installation of Outer Duct
Put the outer duct on the chimney hood and fix to it by 2 screws (Figure 5)
3.5.Installation of Inner Duct Mounting Bracket
2 fixing holes are drilled on the wall with Ø6mm electric drill at a suitable
height and place to fix the inner duct hanger plate onto the wall. 6mm drywall
anchors are nailed into those holes and inner duct mounting brackrets are
pinned down. (Figure 6)
At the last step of chimney hood installation, the inner duct is screwed on the
inner duct mounting brackets.
NOTE: Packaging may not include inner duct according to model.
Fig 5
Fig 6
6