D
E
- GB 9 -
ASSEMBLY OF WHEEL
4
PROTECTION
Slide the wheel guard
[D]
front to the intended position on the
left and right.
5
STORAGE OF BUGGY WHEEL
While the buggy wheel is not in use,
it can be stored in the bag in the rear
storage compartment.
ADJUSTMENT OF
6
THE HANDLEBAR
Press and hold the push buttons
on the left and right of the handle
and move the handle to the position
shown (I or II). When operating with
a bicycle, always use one of the two
positions shown – the push handle
acts as a roll bar in trailer mode.
7
ASSEMBLY OF THE PENNANT
Pin the two pennant pieces together
and slide the finished pennant into
the fabric tab provided.
from the
[E]