sunjoe SJPPH48 Manual Del Operador página 5

Fig. 2
Slide down
3. Attach the 4 reflector panels together using 4 M6x10
Phillips head bolts (A) and 4 plain washers (B). Secure
with 4 cap nuts (C), as shown (Fig. 3).
Hardware Required
ITEM DESCRIPTION
A
Phillips head bolt (M6x10)
B
Plain Washers (6 mm)
C
Cap nut (M6)
Fig. 3
Reflector panels
Plain
Cap nut
washer
Phillips head bolt (M6x10)
4. Attach the assembled reflector panels with the reflector
center cap using 8 M6x10 Phillips head bolts (A) and 6
plain washers (B). Secure with 6 cap nuts (C) (Fig. 4).
Deck ring
Lower pole
Hexagon socket
head bolt
(M6x14)
QTY.
4
4
4
Hardware Required
ITEM
A
Phillips head bolt (M6x10)
B
Plain Washer (6 mm)
C
Fig. 4
Reflector center cap
Assembled
reflector panels
5. Attach the 3 reflector studs (D) and 3 plain washers (B) to
the top of the burner assembly. Tighten the reflector studs
(Fig. 5)
Hardware Required
ITEM
D Reflector stud (M6x70)
B
Plain Washer (6 mm)
Fig. 5
Reflector stud
Burner
assembly
5
DESCRIPTION
Cap nut (M6)
Cap nut Plain washer
Phillips head bolt (M6x10)
DESCRIPTION
Plain washer
QTY.
8
8
8
QTY.
3
3