Logitech Far East 201587 Monarch NV Manual De Instrucciones página 6

4 4
Connect the Keyboard
1. Turn off your computer, and then remove the existing
keyboard and mouse.
2. Plug the green PS/2 connector into the PS/2 mouse
port on the computer. Plug the purple PS/2 connector
into the PS/2 keyboard port on your computer.
3. Restart your computer.
5 5
Set Up and Activate the Mouse
1. Open the battery compartment on the bottom of the mouse.
2. Insert the batteries inside the battery compartment.
Refer to the battery diagram inside the compartment.
Replace the battery compartment door when finished.
3. Make sure the keyboard's PS/2 cable is plugged into the
computer's PS/2 keyboard port.
4. Establish communications: a) Press the red "Connect" button
on the bottom of the keyboard; b) Then press the red "Connect"
button on the bottom of the mouse.
5. The mouse is active now. For more information about mouse
buttons, refer to the online help system located on your hard disk.
2
English