Amazon Commercial B07SNGQQVW Guía De Bienvenida página 6

Installation
Step 2:
•
Plug the pump into a 115 Volt GFCI power outlet.
•
The pump should rest on a level, solid base.
•
Do not suspend the pump by the discharge hose or power cord.
•
Keep the pump inlet screen clear.
•
Do not install pump directly on sand or dirt.
•
A minimum water level of 1 in. is required to prime the pump.
•
Remove the pump and hose from the location when finished pumping.
NOTICE
WARNING
plugged in. The pump will start operating when the power cord is plugged into the outlet.
•
Once the pump has removed the water down to 1/4 in., unplug the pump.
CAUTION
overload.
CAUTION
damage to seals and will cause the pump to fail, thereby voiding the pump's warranty.
6
Make certain you unwind the garden hose completely. Kinks in the
hose will restrict the pump, preventing it from priming.
Do not let plug fall in water and do not stand in water while the pump is
Failure to unplug the pump will result in the pump going into thermal
Do not run the pump dry. Operating the pump without water will cause