Cleaning And Maintenance; Troubleshooting - Amazon Commercial B07SNGQQVW Guía De Bienvenida

Cleaning and Maintenance

Cleaning
• To clean, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp
utensils to clean the product.
Maintenance
• Check the components regularly to make sure all screws and bolts are tightened.
• Store in a cool and dry place away from children and pets, ideally in original
packaging.
• Avoid any vibrations and shocks.

TROUBLESHOOTING

Problem
1. Blown fuse
Pump does 2. Tripped breaker
not start or 3. Plug disconnected
run
4. Thermal overload
5. Corroded plug
6. Motor failed
1. Screen blocked
Pump cannot
2. Hose kinked, bent sharply, or coiled
pump water
3. Airlock
out
4. Hose diameter too small
5. Hose length too long
6. Impeller loose on shaft
7. Impeller broken
Possible Cause Corrective Action
1.Replace fuse
2.Reset breaker
3.Secure plug
4.Unplug the pump for 30 minutes,
then plug in
5.Clean plug prongs
1.Clean screen
2.Straighten hose
3.Clean airlock release feature
4.Use larger diameter hose
5.Use shorter hose
6.Reassemble impeller
9