Cramer 82P Manual Del Usuario página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 118
PROBLEM
Pruning shears have stopped
working.
Pruning shears have little cutting
power or cut badly.
Pruning shears heat up
excessively.
Battery does not last long.
PROBABLE CAUSE
Short-circuit (electrical fault).
Cutting blade is very worn or notched.
Counter blade is highly worn.
Cutting blade is very worn or notched.
Counter blade is highly worn.
Cutting blade is very worn or notched.
Counter blade is highly worn.
Battery charger is faulty.
POSSIBLE SOLUTION *
Turn off the pruning shears completely and
disconnect the power supply. If the problem
persists on reconnecting, disconnect the
batteries and go to the nearest technical
support service to check for problems in the
cable from the pruning shears to the battery.
Check and sharpen. Contact technical support
service if necessary.
Check and sharpen. Contact technical support
service if necessary.
Check and sharpen. Contact technical support
service if necessary.
Check and sharpen. Contact technical support
service if necessary.
Check and sharpen. Contact technical support
service if necessary.
Check and sharpen. Contact technical support
service if necessary.
Check the state of the charger (see Batteries
and Battery Charger).
EN
GB
19
cramer.eu

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido