EDM Product 50130 Manual Del Usuario página 13

Please strictly follow the assemble and installation
50130
REF. direction, arrange two persons to finish the installation.
Improper way will caused safe problem.
St ep 2
St ep 1 St ep 1
Install the TV to the wall plate by using parts C
or D or E that fit your TV the best. The washers
(F o r G ) are p rovided t o e nsure a b e er fi t.
St ep 3
St ep 2
Hang the wall plate onto the heavy duty
screws, be noted that the small head is up
side. The
St ep 4
Move the wall plate up and down in a desired
direc on by use the spanner (H). Once you
have a desired angle, ghten the adjustment
screws.
St ep 3
Flat panel T V wall mount installation
St ep 4
Specification
Suitable for TV 23"- 42"; M ax loading support: 2 5kgs; T ilt range: - 1 5°/ + 1 5°
Par t s in clu d ed
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
B
A
ghten t he h eavy d uty s crews.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
St ep 1
Drill three holes into the wall taking care to
Drill three holes into the wall taking care
measure the distances to fit the base. Insert
to measure the distances to fit the base.
the three plas c anchors (B) into the holes and
Insert the three plastic anchors (b) into
then inser ng the three heavy duty screws (A)
the holes and then inserting the three
heavy-duty screws (A) into the anchors.
into the anchors. Use a drill to secure.
（Please be noted that have to leaven 1 0% of
Use a drill to secure.
Please be noted that have to leaven 10%
the screw-head for hanging the wall plate in
of the screw-head for hanging the wall
next s tep. ）
plate in next step.
St ep 2
Install the TV to the wall plate by using parts C
Install the TV to the wall plate by using
parts C or D or E that fit your TV the best.
or D or E that fit your TV the best. The washers
The washers (F or G) are provided to
(F o r G ) are p rovided t o e nsure a b e er fi t.
ensure a better fit.
St ep 3
Hang the wall plate onto the heavy-duty
Hang the wall plate onto the heavy duty
screws, be noted that the small head is
screws, be noted that the small head is up
up side. Then tighten the heavy-duty
side. The ghten t he h eavy d uty s crews.
screws.
St ep 4
Move the wall plate up and down in a desired
Move the wall plate up and down in the
direc on by use the spanner (H). Once you
desired direction by using the spanner
(H). Once you have the desired angle,
have a desired angle, ghten the adjustment
tighten the adjustment screws.
screws.