Motorola Solutions MTP6000 Guia De Instalacion página 14

Connect to FME cable connector
Figure 6: RF Cable Connection from Cradle to FME Cable
Connector
MTP6000 Car Kit Junction Box (PMLN6662)
Installation
In most vehicles, the best location to mount the junction box is
under the dash. It must be protected from dirt and moisture,
and must be afforded adequate space for cooling. There must
be sufficient space to allow for the connection of the cables.
Mount the junction box using the four screws provided into the
available screw holes (as shown in Figure 7). Fasten screws
after installation.
12