Gemini GD-L115BT Manual Del Usuario página 4

105mm
GD-L115BT
GD-L115BT
1. Channel 1 volume : Adjusts the loudness of the source
connected to CH1
2. BT Pair : Activates pairing mode to connect a phone,
tablet, or other external media source.
3. BT Link : Allows user to link another GD series
speaker via bluetooth to create a stereo pair.
4. Channel 2 volume : Adjusts the loudness of the source
connected to CH2
5. Clip LED : Indicates audio clipping.
6. AUX input（TRS): Connect a digital media player,
etc. to this 1/8" stereo input.
7/12. Mic/Line input switch : Allows user to choose
the MIC or Line signal input.
8/13. Mic/Line input : Connect a microphone or line
signal to this 1/4" TRS input
9/14: Mic/Line input : Connect a microphone or line
signal to this XLR input
10: Channel 3 volume : Adjusts the loudness of the
source connected to CH3
11: AUX Input (RCA) : Connect a CD player, mixer, or
other media source to this line level RCA input.
15: Mater volume : Adjust the loudness of the whole
system.
16: Bass EQ : Controls the bass(low) frequencies of
speaker at a range between -12dB to + 12dB.
17: Treble EQ : Controls the treble(high) frequencies of
speaker at a range between -12dB to + 12dB.
18: Mix Out : Use this XLR output to create a wired
connection to another powered speaker, etc.
19: Power ON/OFF Switch : Turns unit on or off.
20: Voltage Switch : Allows user to change the AC
voltage input.
21： AC Power Input : Mains power supply(supplied
with speaker) plugs in here.
22: Light Power ON/OFF button : Turns the light
system on or off.
23: Light Mode : Changes the lighting modes for the
front mounted speaker lighting.
24: Light Color : Cycles the color of the front mounted
speaker lighting.