Product View; Cleaning Formulas - Bissell STAINPRO4 Guia Del Usuario

A

Product View

Do not plug in your machine until you have
completely assembled it per the following
instructions and are familiar with all
instructions and operating procedures.
1 Handle
2 Handle Assembly
3 Upper Body Assembly
4 Carry Handle
5 Lower Body Assembly
6 ReadyTools Dial
7 Belt Access Door
8 Removable Nozzle
9 DirtLifter PowerBrush
10 EdgeSweep Brushes
A-2 Cleaning Formulas
Always use genuine BISSELL® formulas.
Non-BISSELL cleaning formulas may harm the
cleaner and may void the guarantee.
11 1.5 L Wash & Protect PRO Professional Stain & Odour Formula
12 1.5 L Wash & Protect PET Pet Stain & Odour Formula
13 1.5 L Wash & Protect Stain & Odour Formula
14 1.5 L Wash & Refresh Blossom & Breeze
w/ Febreze Freshness
Certain trademarks used under license from The Procter & Gamble
Company or its affiliates.
To reduce the risk of fire and electric shock
due to internal component damage, use only
BISSELL formulas intended for use with
the machine.
To reduce the risk of fire, use only BISSELL
formula for full-size machines in your cleaner.
Use of cleaning formulas that contain lemon or
pine oil may damage this appliance and void the guarantee.
Chemical spot cleaners or solvent-based soil removers should
not be used. These products may react with the plastic materi-
als used in your cleaner causing cracking or pitting.
6
global.BISSELL.com
B
Assembly
Your machine comes in five easy-to-
assemble components:
Handle Assembly
Upper Body Assembly
Upper Hose Wrap
Lower Body Assembly
Lower Hose Wrap
Three Phillips-head screws are included and
can be found taped to the Handle Assembly.
The only tool you will need to assemble your
cleaner is a Phillips-head screwdriver.
1. Slide Upper Body Assembly onto Lower
Body and secure with two screws.
2. With the "tabs" on Upper Hose Wrap
pointing toward top of handle, attach Upper
Hose Wrap to Handle Assembly by sliding
it to top of Handle until it can go no further.
Turn hose wrap until it snaps into place.
3. Slide Handle Assembly down into upper
body until it will go no further and secure
with screw.
4. Attach Lower Hose Wrap to back of
Upper Body by pushing into open slots and
sliding down until it snaps into place.
5. Wrap flex hose around hose wrap and
secure it into notched out holder as shown.
6. Keep flex hose locked in place with hose
secure latch.
Do not plug in your machine until you have
completely assembled it per the instructions and
are familiar with all instructions and operating
procedures.