Errors - Causes And Corrective Measures - Bosch Wallscanner D-tect 200 C Professional Manual Original

▪ <Switch off after ...>: Choose the time interval after which the measuring tool will
switch off automatically if it is not in use.
▪ <Language>: Select the language used in the display.
▪ <Date & time>: You can set the date and time for saving images and select the
date and time format. Change the button cell (see "Inserting/changing the button
cell (see figure D)", page 54) when the time and date can no longer be saved.
▪ <Measurement unit>: Select the unit of measurement for the measuring indicat-
ors.
▪ <Factory reset>: You can reset all of the menu options to factory settings. Simul-
taneously, all of the saved images will be permanently deleted.
– <Device Info>
Here you will find device information, such as the installed software version and legal
information.
Measuring Tool Software Update
If required, you can update the software of the measuring tool:
– Download the update file to the SD card from www.wallscanner.com.
– Insert the SD card into the measuring tool (see "Data Transfer via SD Card", page 51).
– The update process starts automatically as soon as the SD card is inserted and the
measuring tool is switched on. A corresponding indicator appears in the display.
– When the update is complete, the measuring tool is automatically restarted.
Note: Switch off the measuring tool before removing the SD card. Otherwise, the SD
card may be damaged.
Errors – Causes and Corrective Measures
Cause
Measuring tool cannot be switched on.
Battery pack or batteries
empty
Measuring tool cannot be connected to a PC via USB.
Measuring tool not recog-
nised by PC.
USB Type-C® port (4) or USB
cable (23) faulty
Bosch Power Tools
Corrective measures
Charge the battery pack or change the batteries.
Check whether the driver on your PC is up to date. It may
be necessary to have a newer operating system version
on your PC.
Check whether the measuring tool can be connected to a
different USB cable or a different PC. If it cannot, send
the measuring tool to an authorised Bosch after-sales
service centre.
English | 53
1 609 92A 5L5 | (11.01.2021)