JBL SYNTHESIS SCL-5 Manual De Operación página 9

3. Cut the ceiling drywall along the mark you made in Step 2 to create the mounting opening.
4. Connect the speaker to the amplifier as explained on page 8.
5. Attach the speaker's seismic tab to a support line, as per local safety regulations.
6. Make sure all speaker clamps are in their "ready-to-mount" position.
7. Insert the speaker straight into the mounting opening. Tighten the speaker clamp screws on the front of the speaker baffle. The speaker
clamps will automatically rotate into position and begin clamping the speaker. When you notice resistance on the screws the speaker has
been clamped successfully.
Support Line
Seismic Tab
Speaker Clamps in
Ready-to-Mount Positon
9