Filter Cartridge Replacement - Du Pont WFPF38001C Serie Instrucciones De Instalación

Filter Cartridge Replacement

STEP 1
1
Turn the valve on the System Head
NOTE: "OFF" will shut off all water flow in the home. "BYPASS" will allow unfiltered water to flow in the home.
2
Press the red pressure relief button.
3 D
Use the Filter Housing Wrench to
NOTE: Use a pan or bucket to catch any water in the Filter Housing.
4
Pour out the water in the Filter Housing and remove the used Filter Cartridge
STEP 2
NOTE: Have a pan or bucket handy to rinse out the Filter Housing.
1
Rinse out the bottom of the Filter Housing.
2
Add enough water to fill the Filter Housing 1/3 full. Add approximately 2 tablespoons of bleach and clean the System Head and bottom
of the Filter Housing with a clean cloth. After cleaning, rinse the Filter Housing thoroughly to remove bleach.
3 B
Remove the O-Ring in the top of the Filter Housing and wipe clean.
4
Use silicone grease to lubricate the O-Ring.
5
Place the O-Ring back in the groove of the Filter Housing.
NOTE: Make sure that the O-Ring is seated properly in the groove to ensure a good seal.
STEP 3
1
Insert the new filter cartridge over the standpipe in the bottom of the Filter Housing.
2
Screw the Filter Housing back onto the System Head and hand-tighten.
IMPORTANT: Do not over tighten.
3
Slowly turn the valve on the System Head to the "FILTER" position to allow the Filter Housing to fill with water.
4
Check for any leaks before proceeding.
5
Turn on the nearest faucet and flush the Filter System for 40 minutes.
WFPF3800
A
to the "OFF" or "BYPASS" position.
unscrew the Filter Housing.
B
.
8
1
1
WATER OFF
2
B
3
3
(WATER ON)
D
WATER
OFF
BYPASS
FILTER
V4.2L