Metra 82-4600 Instrucciones De Instalación página 2

1. Determine if flat plate (D)
will be used or not.
Use factory speaker to mark and drill
mounting positions into the plate.
Cut any excess material from the plate
(D) that will be in the way of factory
panel going back into place.
If no additional spacing is required, the
new speaker can be mounted directly
to the mounting plate (D) with hardware
supplied with this kit or with the
hardware supplied with the speakers.
(speed clips may be needed) (Figure A)
Kit Assembly 82-4600
D
(Figure A)
2