Metra 82-4600 Instrucciones De Instalación página 3

2. Determine depth and angle desired.
There are three fixed angles depending
on how rings (A) and (C) are attached
to each other (or custom with a little
work). (A) and (C) at the steepest angle
provide 2-1/4" maximum spacing.
(A) and (C) mounted flat provide 1-1/2"
spacing. For 1-1/4" to 2-1/4" of
spacing, use the (A) and (C)
rings together.
Using the provided ½" #8 flat head
Phillips, mount Angled Spacer (C)
to the flat plate.
Mount the new speaker to (A). The
new speaker can be mounted to (A)
with hardware supplied with this kit or
with the hardware supplied with the
speakers. (speed clips may be needed)
Mount the assembled speaker and (A)
to the Spacer and Plate assembly with
three of the included pan head screws.
(Figure B)
Kit Assembly 82-4600
(Figure B)
3
A
C
D