Maintenance And Cleaning - UFESA PF5500 Manual De Instrucciones

AF-Manual-Purificador-UFESA-PF5500 Fresh Air..pdf
Wind Speed button (c)
In the condition of working, press the wind speed button, the buzzer will ring for one time when the
machine is on.
Press again to adjust the wind speed among the circulation of low, middle high grade with buzzer rings,
the corresponding indicator will be on, when the machine is on.
Light control (d)
When press light button (d) one time, the light is on.
When press light button (d) button for the second time, the light is off.
When press light button (d) for 3rd time, the light gets stronger.
Anion function (e)
Press anion button (e) again, the Anion function will be off and the Anion lamp is off when the machine
is on.
Press anion button (e) one time, the Anion function is on and the Anion lamp is on when the machine
is on.
REMINIDER OF REPLACING FILTER
C
When the machine detects the filter is saturated, the power indicator will keep flashing in red.
M
Please press the power button for 7 seconds to reset after installing a new filter.
Y
CM

MAINTENANCE AND CLEANING

MY
Ensure the item is power off and unplugged before starting any cleaning tasks.
CY
Do not immerse the machine into water or any other liquid.
Do not use abrasive, corrosive or flammable cleansers (such as bleach or alcohol) to clean any part of
CMY
the unit.
K
Use a soft cloth with neutral cleanser to clean away any dust or debris from the surface of the unit and
air inlet/outlet.
After the machine completely dry out, store it in a cool and well ventilated place.
If you do not use it for a long time, in the basic of previous steps, please turn out the machine for a few
minutes from time to time to ensure a good performance.
Note: Do not drop any water into the machine when cleaning.
16
16 12/7/21 16:22