Rds Broadcast Reception; Rds Button G; Mono Button G; Dab And Dab+ Radio - Rotel T14 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
English

RDS Broadcast Reception

This Rotel unit is equipped with RDS (Radio Data Systems) reception
capabilities. The RDS broadcast system provides additional functionality
to FM radio reception by transmitting encoded information along with the
radio signal. This signal is decoded by an RDS receiver and can provide
a range of informational features including:
1. A display of the station's identifying name (e.g. BBC1).
2. A display of the station's program content (e.g. ROCK or NEWS).
3. Traffic information broadcasts.
4. A scrolling text display for announcements or information.
5. Current time and date.
RDS broadcasting has been widely available in many European markets
for years. There are a large number of RDS stations and most users will be
familiar with the features and operation.
NOTE: The RDS features are entirely dependent on the broadcaster
sending properly encoded signals. Thus, they will only be available in
markets where RDS is currently implemented and where stations are
broadcasting these data signals.

RDS Button G

The RDS button on the remote control can step through the various displays.
Press the RDS button on the remote control to step through the following
displays.
1. Radio Text.
2. Name of station.
3. PTY.
4. Today's date and current time.

MONO Button G

The MONO button on the remote control changes the FM mode from stereo
reception to mono reception. In stereo mode, a stereo signal will be heard
if the station is broadcasting a stereo signal and there is sufficient signal
strength.
NOTE: Switching to mono mode can be a useful way to improve the
reception of weak or distant FM signals. Less signal strength is required
for clean mono reception than for stereo reception.

DAB and DAB+ RADIO

NOTE: Make sure that your local area can receive Digital Audio
Broadcast (DAB or DAB+) broadcasting signal.
Press the DAB
q
button on the front of the panel, or remote
DAB channels are categorized into ensembles, which are also known as
multiplexes. Each multiplex provides a number of stations and each service
contains a primary service that can contain secondary services. DAB
technology allows broadcasters to transmit additional data along with the
audio, which can include other audio channels, text and even images and
computer data in the future.

DAB Radio Station Playing

1. Select the DAB Button from the front panel or the remote control and
the unit will scan for available stations. After scanning you will see the
following menu.

Station List

> BBC 1
BBC 2
2. Turn the PUSH SELECT knob
arrow buttons on the remote control to see available stations and press
the PUSH SELECT knob
remote control to select.

Storing a DAB station in a preset

While a DAB station is playing, push the memory button
the 2 digit preset number where you want to save this station on the numeric
keypad
3 D

Playing a preset DAB station

When a DAB station is playing, you can switch to a preset station in one
of the following ways.
1. From the numeric keypad
station.
2. Press the PRESET +/-
numbers. Press the up/down
buttons on the remote control or turn the knob
select the desired station, then press the PUSH SELECT knob
front panel or the ENT button on the remote control.

DAB Settings Menu

Press DAB
q
settings Menu. Turn the PUSH SELECT knob
up/down arrow buttons on the remote control to go through each sub-menu.
• <STATION LIST>: Shows stations list.
• <LOCAL SCAN>: Start a limited scan of available stations by pressing
the PUSH SELECT knob
remote control. (Not available in all markets.)
• <FULL SCAN>: Start a full range scan by pressing the PUSH SELECT
8
knob
• <MANUAL TUNE>: Press the PUSH SELECT knob
or the ENT button on the remote control and select stations manually by
turning PUSH SELECT knob
arrow buttons on the remote control.
• <DRC>: Dynamic Range Control, select between "off", "high" and
"low". Turn the PUSH SELECT knob
M
.
up/down arrow buttons on the remote control to change and press the
PUSH SELECT knob
remote control to save.
• <STATION ORDER>: Display station order as either "Alphanumeric",
"Ensemble" or "Valid".
8
on the front panel or use the up/down
8
on the front panel or the ENT button on the
. Up to 30 preset DAB radio stations may be stored.
3 D
, press the preset number of the desired
H
buttons on the remote control to display preset
B
arrow buttons or the PRESET +/-
M
on the front panel or remote control, to toggle to the DAB
8
8
on the front panel or the ENT button on the
on the front panel or the ENT button on the remote control.
8
on the front panel or using the up/down
8
8
on the front panel or the ENT button on the
13
9 E
, then enter
H
8
on the front panel to
8
on the
on the front panel, or use the
8
on the front panel
on the front panel or use the

Publicidad

Tabla de contenido
loading

Tabla de contenido