Horizon Global 76244 Instrucciones De Instalación página 5

5. Loosely install the M10 hex bolts with 7/16" conical washers (teeth side toward
hitch) into existing weld nuts in the bottom of frame rails.
7. Reinstall exhaust – Raise exhaust back into position and reinstall the rubber
hangers removed earlier. Note: A soapy water solution applied to the rubber
hangers will ease installation.
©2018 Horizon Global Americas Inc. - Printed in Mexico
6. Tighten all 1/2" GR5 hitch fasteners with torque wrench to 75 Lb.-ft.
(102N*M) and all M10 CL8.8 fasteners to 38 Lb.-Ft. (52 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 5 of 15 76244NP 7-15-18 Rev. A