Thetford N3000 Serie Manual Del Usuario página 111

Removing drawer
To remove the drawer for refrigerator model C1,
pull the drawer until the stop and push it a little
bit back. Then push the guide locks backwards, as
illustrated. Pull the drawer further to the front and
lift the wheels over the curves. The drawer is now
free to remove. After cleaning, pull out the guides
until they snap into place, then place the drawer
back in reverse order.
To remove the drawer for
refrigerator model C2,
completely open the
refrigerator door and pull
the drawer until the stop.
Then lift the drawer at the
front, as illustrated. The
drawer is now free to
remove. After cleaning, place the drawer back in
reverse order.
Never clean your refrigerator with soap
or agressive, caustic or soda-based
cleaning agents.
The loose parts of the refrigerator are not
suitable for the dishwasher.
Water through the vents may damage your
refrigerator. Therefore install winter covers
before washing your vehicle.
12 Switch off refrigerator
Before defrosting the
refrigerator or storing your
vehicle, switch off the
refrigerator. Push the on/
off switch, as illustrated,
and hold it for 2 seconds to switch off the
refrigerator. All lights will go out.
13 Defrosting
A layer of ice on the cooling fins will decrease
the cooling capacity and durability of your
refrigerator. Therefore your refrigerator is
provided with an automatic defrost system,
which prevents ice formation.
Despite this system, it is also possible to manually
defrost your refrigerator on occasion. Remove all
food, wrap it tightly in newspaper and put it in a
cold place or in an insulated bag. Then open the
doors. Put dry towels in the refrigerator to catch
the remaining water. When the refrigerator is
defrosted, thoroughly dry the inside.
Do not speed up the defrosting process by
removing the ice layer with force or sharp
objects or by using a hairdryer.
14 Storage
If you do not expect to use your refrigerator for a
longer period, it is important to thoroughly empty,
defrost and clean the complete refrigerator. Then
install the winter cover over the vents, to protect
your refrigerator during storage.
To prevent odours and mould in the refrigerator,
keep the refrigerator door, as well as the freezer
compartment door, open during storage. External
doors are equipped with a storage lock.
Make sure the gas taps of the gas bottle are
closed during storage.
Water through the vents may damage your
refrigerator. Therefore install winter covers
before washing your vehicle.
111
For model A and model B
rotate the storage lock and
secure it by using the strike
plate, as illustrated.
For model C1 and model C2
first open the door and
rotate the storage lock, as
illustrated. Then close the
door until you hear the first
click. Make sure the door is
still a bit open.
When you use the
refrigerator after storage,
always make sure to rotate
the storage lock back to its
original position.
EN