Fanaway ORBIT LD-36 CTC Manual Del Usuario página 8

Fanaway Orbit Installation Instructions
Step 1, 2, and 3. Connect the
Live, Neutral, and Earth wire to
the mount bracket terminal block.
Step 4. Connect supply connector
from mounting bracket to receiver.
Step 5，and 6. Connect wiring
connectors from receiver to the wiring
connectors form the Fan motor and
Light kit.
8 | P a g e
Mounting
Bracket
Receiver output wires to
DC motor
DC motor input wiring
connector.
Fig. 4
Earth wire
Receiver output wires
to light kit
Light Kit input wiring
connector.
Fan motor and Light kit