Webasto SmarTemp Control 3.0 Manual De Instrucciones página 9

SmarTemp Control 3.0 Installation - Operating Instructions
Operation from Mobile Application
The SmarTemp 3.0 with Bluetooth connectivity can be controlled via a smartphone or other mobile device.
The device will scan for nearby devices when the application is started. Be sure your SmarTemp 3.0 has
Bluetooth enabled by going to Settings – Bluetooth – Enabled before starting the application for the first time.
The first time your SmarTemp is discovered, you will be prompted to enter
a 4-digit code that will be displayed on the SmarTemp screen. Enter that
code and press SEND.
The home screen shows the current status of the heater. Refer to the table
below for detailed information.
9