Roboluber Accessories - Lumax LX-1182 Manual De Instrucciones

SPECIFICATIONS
Power Battery Charger: LX-2183
Output: 21 Volt, DC 1.4A
Input Voltage and Frequency: 100~240V AC, 50/60 Hz.
Charge Time: 1 Hour
Battery Charger Current (Fast Charge): 1500 mAh
Net Weight of Battery Charger: 4.6 oz. (130g)
Dimensions of Battery Charger: 3-1/2" x 2-1/8" x 2-3/8" (90 x 55 x 60 mm)
Outlet Hose, LX-1214:
ACCESSORIES
These accessories or attachments are recommended for use with your RoboLuber specified in this
manual. The use of any other accessories or attachments may present a risk of injury to you or people
around you. The accessories or attachments should be used only in the proper and intended manner.
WARNING!
Always remove Battery Pack before Changing or Removing Accessories. Be aware that
your RoboLuber is always in an operating condition, because it does not have to be plugged into an
Electrical Outlet. Avoid accidental starting. Prior to inserting Battery Pack or operating the unit, always
check to see that the Trigger-Lock Lever is not in a "flipped-up" position. Carrying tools with your finger
on the switch or inserting the Battery Pack into a Tool with the switch Trigger-Lock Lever in a "flipped-up"
position invites accidents. Only use Accessories specifically recommended for RoboLuber. Others may
be hazardous and may void Warranty.
LX-1400
LX-1404
6
30" with 2 Springs, 1/8" NPT x 7/16-28 UNEF
Max. Pressure Rating: 10,000 PSI (518 bar)
LX-1401
LX-1406
LX-1407
LX-1402
LX-1408