Installation Steps; Package Contents - Axis Communications AXIS 216FD Manual Del Usuario

AXIS 216FD/AXIS 216FD-V Installation Guide
AXIS 216FD/AXIS 216FD-V
This installation guide provides instructions for installing the AXIS 216FD Fixed Dome
Network Camera and AXIS 216FD-V Fixed Dome Network Camera on your network. For all
other aspects of using the product, please see the User's Manual, available on the CD
included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Set an IP address. See page 6.
5. Set the password. See page 9.
6. Adjust the focus. See page 10.
7. Complete the installation. See page 10.

Package contents

Item
Fixed Dome Network camera
PS-H indoor power supply
(country specific)
Power supply extension cable 1.8 meters
Terminal block connector
Mounting kit
CD
Printed Materials
Installation Guide
Models/variants/notes
AXIS 216FD: tamper-resistant casing
AXIS 216FD-V: vandal-resistant casing
Europe
UK
Australia
USA/Japan
Argentina
Korea
4-pin connector block for connecting external devices to the I/O terminal
connector
Screwdriver for tamper-proof screws
Tamper-proof screws
Drill template
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS 216FD/AXIS 216FD-V Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws
and regulations.
Page 3