Status Indications; Setting Up The Toshiba Drive - Toshiba PH3064U-1EXB Manual Del Usuario

10

Setting up the Toshiba drive

Status indications

Light status
Flashing
Solid
Flashing rapidly
NOTE
Setting up the Toshiba drive
1 Attach the stand
Carefully seat the hard drive into the stand in the vertical
position.
(Sample Illustration) Attaching the stand
Indicates
The connected computer is reading or writing data on
the drive.
The drive is powered on but is not currently being
accessed. After five minutes of inactivity, the light dims
when the drive enters power-saving mode.
An error has occurred. Disconnect and then re-connect
the drive to your computer. If the condition is not
cleared, contact Toshiba support.
After five minutes of inactivity, the drive enters a power-saving mode
to reduce electrical consumption and the indicator light dims. The
next time you access the drive, the drive automatically exits power-
saving mode and resumes normal operation.
Place the drive on a sturdy, flat surface. Do not place the drive on an
unstable or makeshift base, such as a stack of books, which may be
prone to collapse or toppling.
Stand