Intellinet Network Solutions 524803 Guía De Instalación Rápida página 2

Wireless 150N Portable 3G Router • Quick Install Guide
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Portable 3G Router, Model 524803.
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual on the CD enclosed with this
product or at www.intellinet-network.com.
Package Contents
• Wireless 150N Portable 3G Router
• Quick install guide, plus user manual on CD
• Power adapter
• Built-in rechargable Li-ion battery
• Ethernet Cat5 RJ45 cable: 1.0 m (3 ft.) and USB extension cable: 1.0 m (3 ft.)
• Carrying case and car charger
HARDWARE SETUP / CONNECTIONS
Charging the Battery
Before using the router, the battery needs to be charged. Charging the battery takes
about four hours.
1. Remove the battery
compartment cover on
the back of the router,
insert the included
battery, then replace the
cover, sliding it until the latch
snaps securely back in place.
2. Plug the included power adapter into an AC
outlet or an automobile's auxiliary power outlet,
then connect it to the mini USB port on the router
(DC In). While the router battery is charging, the
PWR/CHG LED lights orange, then turns green when
the router battery is fully charged.
3. On the left side panel, set the On/Off switch to On. CAUTION:
Always switch the router off before removing the battery,
and only use the battery and power adapter included with
this router, as other types could be dangerous and damage
the router.
Network Connections
If needed, visit www.intellinet-network.com for a complete list of compatible
3G USB modems.
2
English
Wireless 150n
™
Cover
PWR/CHG
LED
English
Battery
DC
In
Power adapter