Sonoff ZBMINI Manual Del Usuario página 10

SONOFF TECHNOLOGIES CO., LTD.
eWeLink App pairing
1. Download APP
2.
Add SONOFF ZigBee Bridge
3.
Power on
After powering on, the device will enter the pairing mode during the first use and the LED
signal indicator flashes.
The device will exit the pairing mode if no next operation for a long time. If enter
again, please long press the manual switch for 5s until the LED signal indicator
flashes and release.
4.
Add sub-devices
Access eWeLink APP, select the Bridge that you want to connect, and tap "Add" to add
a sub-device, and be patient until the pairing completes.
If the addition failed, move the sub-device closer to the Bridge and try again.
eWeLink
N In N In
L In
N In
ZBBridge
Added:0
No child device,please add.
Add
eWeLink
Android™ & iOS
L In LOut S1 S2
Add Device
Connecting
Keep the device close
enough to the hub.
>
25s
Looking for device
1 devices Found
9
English