General Safety Instructions - LaserLiner DistanceCheck Manual Del Usuario

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as the
!
latest information under the internet link at the end of these
instructions. Follow the instructions they contain. This document
must be kept in a safe place and if the laser device is passed on,
this document must be passed on with it.
Function / Application
Compact laser rangefinder for measuring lengths, surfaces and volumes
indoors

General safety instructions

– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– Keep the measuring device away from children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
– Please ensure compliance with the safety regulations set out by local
and national authorities with regard to the correct and proper use of
the device.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not permitted.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars)
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or
be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high
voltages or high electromagnetic alternating fields.
DistanceCheck
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014/AC:2017
09
EN