UFESA PF4 500 Manual De Instrucciones página 12

Leave at least 30cm of space on the back and sides of the product, and at least 50cm of space above
the product when using.
To prevent plastic parts from melting or catching on fire, do not place the product near heating appli-
ances.
Ensure both the filter and its cover is properly installed before using.
Product must be used on a level and stable surface.
Do not use outdoors.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs
or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
DESCRIPTION
Body
1. Control panel
2. Lighting
3. Air outlet
4. Body
5. Air inlet
6. Filter
7. Base
Control panel
8. Power button
9. Timer button
10. Wind speed button
11. Anion/light button
12. Pilot light
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that the packaging from the filter has been removed (following the steps for installing filter).
FILTER INSTALLATION
Ensure the appliance is unplugged before removing or installing the filter.
12