Leckey Mygo Max Manual Del Usuario página 27

The upper leg supports will be set at the
minimum position on arrival. Set the depth
before placing the child in the seat. Fine
adjustment is possible afterwards but is
restricted by the user's weight. To achieve
the correct position measure the length from
the child's lower back to the back of their
knee.
Adjust the supports to the desired position
using the two knobs underneath the seat
base. To adjust, loosen the knobs, slide to
the desired position and retighten. Keep the
supports pointing straight forward at this
time unless wind sweeping or adduction,
abduction must be accommodated, in which
case set the angle accordingly using the
knobs again.
All manuals and user guides at all-guides.com
To adjust the width of the femoral guides.
Loosen the screws (a) and position as
required. Retighten the screws. There are
two screws per femoral guide.
A