Cassettes - Panasonic SC-AK321 Instrucciones De Funcionamiento

Cassettes

SUPER
SOUND EQ
MIC VOL
PRESET EQ
Microphone
(not included)
MIC
c, DECK 1
[, REC
VOLUME
PLAY MODE
ALBUM ( or )
SHIFT
S.SOUND EQ
Playback
You can use either deck 1 or deck 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but the unit will
not be able to do full justice to the characteristics of these tapes.
1
Press [;:, TAPE].
The unit comes on.
If a cassette was loaded, play starts automatically (One touch play).
2
Press [c, DECK 1] or [c, DECK 2] and insert the
cassette.
Insert with the side to be played
facing towards you and the
exposed tape facing down.
Close the holder by hand.
3
Press and hold [PLAY MODE] on the remote control to
select the reverse mode.
Every time you press and hold the button:
→ →
: One side is played.
: Both sides are played.
: Both sides are played repeatedly until [L, STOP] is
pressed.
To listen to 2 tapes consecutively
Load a tape into each deck and select "
played repeatedly until [L, STOP] is pressed.
4
Press [;:, TAPE] to start playback.
Every time you press the button: / R ↔ F -
F - : The forward side (front side) will play.
/ R : The reverse side will play.
To stop tape playback
Press [L, STOP].
To fast-forward or rewind
Press [g/REW/3] (rewind) or [f/FF/4] (fast-forward).
14 To select between loaded decks
Press [DECK 1/2] (remote control: [PLAY MODE]).
RQT7340
All manuals and user guides at all-guides.com
g/REW/3,
f/FF/4
-/J, CD
L, STOP
c, DECK 2
DECK 1/2
/-, TAPE
CLOCK CLOCK / PL PL AY /
AUTO OFF O OFF REC REC
TIMER TIMER
SLEEP EEP CD DISP CD DISP DIMMER DIMMER
ABC ABC DEF DEF
DISC DISC
1 2 3
GHI GHI JKL JKL MNO MNO
PROG PROGRAM AM
4 5 6
PQRS PQRS TUV TUV WXY WXYZ
PLAY MODE AY MODE
7 8 9
SPACE SPACE
REPEAT AT REP
0
DEL DEL 10
CD CD
TUNER TUNER TAPE TAPE
CLEAR LEAR
BAND ND
AUX AUX
VOL VOL VOL VOL
ALBUM BUM CURSOR CURSOR g, REW/3,
REW FF
f, 4/FF
TITLE TITLE
INTRO INTRO MARKER MARKER ENTER ENTER
SEARCH SEARCH
K A R A O K E K A R A O K E
SHI SHIFT S. S.SO SOUND EQ UND EQ PRE RESET EQ T EQ MUT UTING ING
KARAOKE,
PRESET EQ
Front side
". Both tapes will be
Note
•
Tape playback is momentarily interrupted if you open the other deck.
•
Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
•
Tape slack can get caught up in the mechanism and should be
taken up before the tape is played.
•
Endless tapes can get caught up in the deck's moving parts if used
incorrectly. Use tapes appropriate to this unit's auto-reverse
mechanism.
Recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Preparation:
Wind up the leader tape so recording can begin immediately.
Press [;:, TAPE] then [L, STOP] to select tape as the source.
1
Press [c, DECK 2] and insert the cassette to be
recorded.
The tape direction is automatically set to "F :".
To record on the reverse side
Press [;:, TAPE] twice, then press [L, STOP]
2
Press and hold [PLAY MODE] on the remote control to
select the reverse mode.
Every time you press and hold the button:
→ →
: One side only records.
: Both sides record (forward ¡ reverse).
,
" " automatically changes to "
3
Select the source to be recorded.
Radio recording:
Tune in the station. (A page 13)
CD recording:
1 Insert the CD(s) you want to record.
Press [:/J, CD] and then [L, STOP].
2 Prepare the desired CD recording mode.
Remote control only
•
To record programmed tracks (A do steps 1–3 on page 9
for CD-DA or steps 1–4 on page 10 for MP3).
•
To record specific CDs/tracks
1. For CD-DA, do steps 1 to 2 on page 8: "To listen to
specific CDs and tracks (CD Play Mode function)".
For MP3, do steps 1 to 2 on page 9: "CD Play Mode
function for MP3".
Ensure CD is stopped.
2. (MP3 only) For 1-ALBUM mode and 1-SONG mode:
Press [ALBUM ( or
3. For 1-SONG mode: Press [g, REW/3] or [f,
4/FF] to select the track.
Tape-to-tape recording:
1 Press [;:, TAPE] and then [L, STOP].
2 Press [c, DECK 1] and insert the cassette you want to record.
4
Press [a, REC] to start recording.
To stop recording
Press [L, STOP].
If the tape finishes before the CD
The CD continues playing. Press [L, STOP] to stop it.
Reducing noise when recording AM
Remote control only
Hold down [PLAY MODE] while recording.
Every time you hold down the button: BP1 ↔ BP2
Choose the setting with the least noise.
Note
•
Changes to volume and sound/field quality do not affect recording.
•
You cannot open deck 1 while recording.
•
You cannot fast-forward or rewind one deck while recording with
the other.
•
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
(Continued on next page)
" when [a, REC] is pressed.
)] to select the album.