Abus Secvest FUBE50000 Manual De Instalacion Y Uso página 37

Disarming the wireless alarm system
 Perform authentication in line with the configured control
 Disarm the wireless alarm system by pressing the 'disarm'
Status query
 Perform authentication in line with the configured control
 Run a status query for the wireless alarm system by pressing
 The LED display indicates the status of the different partitions.
Arm internally/Switch output
 This button can be used either for arming internally or for
panel operating mode.
button.
panel operating mode.
the 'status query' button.
switching one (or more) wireless alarm system output(s). This
can be configured within the wireless alarm system.
Displays and functions
37