Installation Menu; Tv Setup Menu - Sveon SDigital TV Serie Manual De Usuario

SDT10100 - User Guide
9.1 Installation
The Installation menu allows you to setup the general values of the device. It is the first window which appears
when the device is connected. Please read carefully the section 8 of this user guide for further information.
9.2 TV Setup
The "TV Setup" section offers the following options:
• TV Format
- 4:3 LB (LetterBox): For a 4:3 TV format screen
- 4:3 PS (PanScan): For a 4:3 TV format screen (the left and right sides of the picture are lost to
adjust it to a 4:3 TV format)
- 16:9 LB (PB): Wide format
Note. A wide picture (16:9 format) includes black bands if it is displayed in a 4:3 format screen; if it is displayed in
a wide TV, the picture covers the whole surface of the TV screen.
• TV Mode
Select the TV or VCR output resolution: (480i, 480p, 576i, 576p)
Note: If you want to record using VCR output, you have to select the resolutions 480i/576i
• OSD Transparency
This menu allows you to adjust the opacity of the screen menus. The level "1" is the most trans
parent one.
• Information display time
Select to adjust the time of the information display when the "Info" button is pressed. If the selected
value is "Always", the information tab appears until you press "Exit" button.
• Video output
This option stablishes the RGB output mode when you use a Scart connector with 15 pins or CVBS
when you use a component cable.
Note: To get the best picture quality we recommend you to use RGB output because this signal is
applied directly to the TV output without distortions. CVBS is a composite video signal and it has to be proceeded,
separated in componentes and then amplified; the composite signal is not as pure as RGB.
• Video quality:
Video improvements are:
www.sveon.com
- Skin tone
- Black and white extensions
English
34