SDT10100 - User Guide
13.3 Video
SDT10100 supports the following video file formats: MPEG-4, XVID, AVI, DAT, VOB, MPEG2. To play video files
press "Menu" button of the remote control, select "Multimedia" and then "Video" option. You can also access directly
by pressing the red button of the remote control during TV mode.
Use the arrow buttons up, down, right and left to navigate between folders and files. Select the video file you want
to play and press "Ok".
- Press red button to pause/resume the playback.
- Press the green button to go forward step by step
- Press yellow button for fast forward option (available speeds: x2/x4/x8x/x16/x32) or to resume the normal play-
back speed.
13.4 PVR options
The "PVR Options" menu allows you to watch the recording programs and also to setup the recording options.
Note: The file system of the storage device must be FAT or FAT32.
- Recording List: Plays a recording by pressing "OK"
button or delete the recording by pressing the red button
of the remote control.
- Recording Device: Selects the storage device and the
partition where are going to be saved the recordings.
This option also allows you to format the hard disk par-
tition by pressing the red button of the remote control or
to format the device by pressing the green button. Ple-
ase note this options erase all the information saved in
the external storage device.
- Recording preferences: Allows you to select between
the Timeshift options, one-button recording options and
Recording Time.
• Timeshift capacity: Available interval time for Timeshift option.
• Timeshift: Enables/Disables Timeshift function.
- Pause: Timeshift enabled
- Auto: Timeshift always enabled
- Off: Timeshift disabled
www.sveon.com
English
42