SDT10100 - User Guide
• Search: Use this option to search a TV channel by the channel name.
12.1 Electronic Program Guide (EPG)
Select "EPG" option to display the Electronic Program
Guide information or program recordings.
1. Press "EPG" button to access to the Guide informa-
tion.
2. Press the arrow buttons up and down to select the
channel.
3. Use the arrow buttons left and right to change the date
or the selected program.
4. Press "OK" button to display the program information
or press "Exit" to go to the previous window.
5. Press the red button of the remote control to add new
recording tasks in the schedule.
Note: EPG information is subject to the channel availa-
bility. This information is not available if the TV channel
doesn´t include EPG option.
12.2 Radio
The radio station list and EPG functios for digital radio signal have the same parameters than the TV channels.
Please read carefully the sections of this user guide for further information.
13. Multimedia
Before using "Multimedia" option please make sure to
connect an external storage device through the slot
system or using the USB Host por of the device. If there
is no external device connected to the SDT10100, a
message will appear indicating that there isn´t any ex-
ternal device connected.
When an external storage device is connected,an ons-
creen message appears which indicates that the system
is detecting the device and loading its content. Wait du-
ring some minutes and then go to "Multimedia" menu by
pressing "Menu" button of the remote control and selec-
ting "Multimedia" option or by pressing the red button
(during TV mode).
40
English
www.sveon.com