Rg1-G And Rg2-M Wall-Mounting Gas Detector - AVE RG1-M Manual Del Usuario

Wall-mounting gas detectors
RG1-G
.
COD
For LPG gas
RG1-M
.
COD
For methane gas
VERY IMPORTANT!
Please read carefully the following instructions in order to get the best
performance out of the gas detector. The installer must give this bro-
chure to the user and ask him to take note of its contents to ensure a
correct use of the device. The gas detector is an auxiliary protection to
be added to the other available outdoor protection devices. However it
is necessary to follow the instructions with the greatest care.
GAS DETECTOR INSTALLATION DOES NOT EXONERATE OBSERVANCE
OF ALL THE REGULATIONS CONCERNING THE CHARACTERISTICS,
INSTALLATION AND USE OF GAS DEVICES, VENTILATION OF ROOMS
AND THE DISCHARGE OF THE COMBUSTION PRODUCTS ESTABLIS-
HED BY TECHNICAL STANDARDS AND LAWS IN FORCE IN THE
COUNTRY WHERE THE DEVICES IS USED. (see EN 1775)
To be filled in by the installer:
date of installation
date of manufacture
serial number
Remember to aplly the label indi-
cating the recommended date for
the replacement of the device (5
years from installing). Use the
provided labels.
CEI UNI EN 50194
Raccommanded replecement date
at the moment of installation
room of installation
Installer's signature and stamp
GB
Complying with
TYPE A
17