Line Input - US Blaster USB 3451 El Manual Del Propietario

USB 3451 / 3461 / 3471 / 3481
Car Power Amplifier
INSTRUCTIONS FOR FUNCTIONS AND CONTROLS
1

LINE INPUT

outputs of a source ( head unit,CD player,DAT,etc. ) or of an external electronic
crossover must be connected to them
2 HIGH INPUT
3 LEVEL
Knob for volume adjustment.
4 LPF
Low pass frequency adjusting knob,the frequency ranges from 40Hz to 250Hz.
5 X-OVER
Optional switches for high pass filter(HPF)/full pass filter(FULL)/low pass filter(LPF)
6 HPF
High pass frequency adjusting knob,the frequency ranges from 80Hz to 500Hz.
7 BASS BOOST
8 REMOTE CONTROLLER OUTLET
helps to boost the bass. Pls turn the knob of BASS BOOST to 0dB before using the remote controller.
9 REMOTE CONTROLLER
10 INDICATOR LIGHT
being working now.When this LED sends out red light, it means that the self-protection of the
amplifier.
11 FUSE
Standard automatic fuse, you must use the same power fuse if you need to change it.
12 SPEAKER
Speaker connecting terminals.
© US Blaster Europe BV
Left and right channels inputs of the amplifier system. Preamplifier
High level input terminals.
Bass boost knob ,the boost ranges from 0dB to +12dB.
Bass boost knob ,the boost ranges from 0dB to +12dB.
When this LED sends out blue light, it means that this amplifier have
To be connected with the remote controller, which