Front Panel; Setup And Use; System Indicators - Biamp AudiaFUSION Manual

Setup and Use

The Audia software provides the interface for configuring and programming AudiaFUSION. The information supplied by this manual
relates to hardware installation, physical connections, and device and channel failover concerns. For more details on software setup,
please consult the Audia software Help File.
Figure 1 . Front Panel

System Indicators

The LED indicators on the front panel provide information about the function and operational status of the AudiaFUSION chassis and any
installed AM-600 amplifier modules. Columns one through eight correspond to the eight amplifier module slots. The remaining LEDs
correspond to the AudiaFUSION chassis.
Figure 2 . System Indicators
Channel Indicators
Alarm is a two-color LED that illuminates when a channel fault has occurred. Two types of channel faults can be reported, depending on
the severity of the problem. Amber indicates a Warning, which means that some aspect of the AM-600 amplifier module is not performing
within normal specification. Audio may still be passing, but if the condition causing the Warning is not corrected, channel failure may occur.
Red indicates an Alarm, which means that some aspect of the AM-600 amplifier module has failed and audio is no longer passing on that
channel. Use the Audia software to determine the specific type of channel warning or alarm that has occurred.
Activity is a two-color LED that illuminates in green when the channel is configured and actively passing audio and amber when the channel
is configured and in standby. Standby only occurs when a channel has been designated as a secondary failover channel in the configuration.
AudiaFUSION FRONT PANEL
Channel Indicators
4
alarm
activity
signal 1 status
power
signal 2 ais
alarm
activity
signal 1 status
signal 2 ais
Chassis Indicators
power