Uline H-5164 Manual De Instrucciones página 4

Figure 10
PAGE 4 OF 12
ASSEMBLY CONTINUED
14. While one person holds the table legs upright, insert
four screws through the holes in the bench channels
and into the bench as shown to keep the sliding end
caps under the glide rails. (See Figure 10)
15. Repeat step 14 for the second bench seat.
16. Turn the table upright.
1-800-295-5510
uline.com
NOTE: Do not overtighten. These screws help
keep the legs in the glide rails.
CAUTION! When using an umbrella with this
table, always anchor the umbrella to the
umbrella base.
0621 IH-5164