Base Setup - Ergomotion 300 Serie Manual Del Propietário

Base Setup

For easy installation, place the bed base box in a desired location with the
bottom of the box facing up.
Remove the binding straps and packing materials, making sure not to
puncture the box with any sharp objects.
2
a.
b.
If the legs are not desired, skip this step.
1. Remove the bed base from the box. All
components are located in the boxes attached
to the underside of the base (see image a). The
warranty certificate is included with the owner's
manual. Please follow the instructions for warranty
registration and save for your records.
2. Remove the mattress retainer bar attached to
the underside of the frame.
3. To install the legs, thread the washer over the
bolt of the leg, with the recessed side facing the
leg, and tighten by hand. Be sure not to over-
tighten. Please refer to image b.
Important: Two people are required to move the
bed base. Do not drag across the floor.
For optional leg sizes, refer to page 29.
3