Motor Removal; Headboard Brackets - Ergomotion 300 Serie Manual Del Propietário

Motor Removal

The motors can be easily removed from the bed base.
1. Disconnect the head and/or foot
motor plug from the control box.
2. Remove cotter pin and cylindrical pin from
connection point. Remove motor.
12

Headboard Brackets

1.
Headboard Brackets are an optional accessory and are not included.
To Install:
1. Slip the threaded bolt of the leg through the slot in the headboard bracket before screwing the leg into
the bed.
2. Next, use the nut and bolt provided to secure the bracket to the frame.
To purchase accessories, see page 29.
2.
13