SII IP-7900-20 Guía De Configuración Rápida página 53

#BACK ADJUST VAL
>XX:+0000PULSE
#BIDIR ADJ1 L XXX
>XX:+00
#BIDIR ADJ1 R XXX
>XX:+00
#BIDIR ADJ2 L XXX
>XX:+00
#BIDIR ADJ2 R XXX
>XX:+00
#BIDIR ADJ3 L XXX
>XX:+00
#BIDIR ADJ3 R XXX
>XX:+00
#BIDIR ADJ4 L XXX
>XX:+00
#BIDIR ADJ4 R XXX
>XX:+00
#REMAINING MEDIA
>XX:YYYm
#DELETE MEDIA
>02:TYPE02 OK?
#COPY MEDIA
>XX
#PASTE MEDIA
>01 à 02*
M.ADV MENU
Menu
#SING. ADV
#EXECUTE
#AUTO BIDIR ADJUST
#EXECUTE
#MULTI ADV
#EXECUTE
#MANUAL BIDIR ADJUST
#EXECUTE
# BACK
#EXECUTE
REWIND MENU
Menu
REWINDING MEDIA
PH.REC MENU
Menu
#PH RECOVERY
>NORMAL
FORM FEED MENU
Menu
FEEDING MEDIA
PH.MAIN MENU
Menu
#CAP CLEANING
>
#INK SYSTEM OPT
>STORE INK SYS
#COLOR CHANGE (8->4)
>
52
All manuals and user guides at all-guides.com
Set the back adjust value of media. This value is used to correct the splice of two images divided by the auto-
cleaning (PH CLEANING [MODE2] performed during printing.
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (MAX SPEED and HIGH SPEED) are set.
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (NORMAL) are set.
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (HIGH QUALITY) are set.
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (MAX QUALITY) are set.
Set the remaining media. When the remaining media is set beforehand, you can check the remaining media (by
subtracting the printed length) in the MEDIA MENU.
Delete the registered media. No. 01 to 20 of registered media can be selected.
Select the media number of copy source. Use this menu to copy the media information (parameters) of the
registered media to other media. Designate the copy destination in [PASTE MEDIA].
Select the media number of copy destination.
To determine the media advance value, print the media advance correction pattern with the current value.
Then set the adjustment value.
Print a bidirectional print position adjustment pattern and enter the correction value. Then all the correction
value can be set automatically.
To determine the media advance value, print three media advance correction patterns centered on the current
value. Then set the adjustment value.
Print a bidirectional print position adjustment pattern for each print mode and set the correction value.
Print the back correction pattern and set the back correction value.
While you keep pressing the key, the printer rewinds media.
This menu is used to clean the print head of the printer. Press the
head.
While you keep pressing the key, the printer feeds media. (When cut-sheet media is used, the printer ejects
the media.)
The carriage moves to the maintenance area so that the capping unit can be cleaned periodically.
Execute the service (cleaning) operation.
Used to change the printer mode from 8-color mode to 4-color mode or from 4-color mode to 8-color mode.
Outline of functions
Outline of functions
Outline of functions
key to enter PH.REC MENU for the print
Outline of functions
Outline of functions