HOW TO CHARGE AND START THE WATCH
C 5D22 5D44_E.indd 8
All manuals and user guides at all-guides.com
1. Turn the crown clockwise repeatedly to charge
the watch.
The manual winding mechanism for generating the
✽
electric power functions when the crown is turned
clockwise. The watch can also be charged when the
crown is turned in a reciprocating motion.
When the watch is completely stopped, the direct
✽
drive indicator hand points at scale marking 1 under
the 0 position (standby position).
. After electric power generation by turning the
crown continues for a certain period, the direct
drive indicator hand moves to point at scale
marking 0 and the second hand starts moving.
Make sure to stop turning the crown to check it.
If the second hand does not move even though the
✽
crown is turned, turn the crown more quickly.
If the watch has been left untouched for several years,
✽
the second hand starts moving in 2-second intervals
after the crown is turned. This is not a malfunction.
Charge the watch by turning the crown until the direct
drive indicator hand moves from the standby position to
the 0 position. It may take approximately 5 to 6 minutes.
07.8.22 1