Volume Control - Cochlear Baha Compact Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Disconnecting
Bending the sound processor slightly in any direction will release it from the
abutment.
Note: Do not push the sound processor straight in and do not pull it straight out.

Volume control

If you turn the volume control upwards the volume increases and if you turn it
downwards it will decrease. If you want to switch off the sound processor, turn
the volume control all the way down until it clicks off.
Electrical input
The sound processor has a three-pin electrical input designed for connecting
external equipment. Note that the red marking on the plug must match up with
the corresponding marking on the sound processor.
Safety instructions when connecting external equipment
Only connection cables supplied by Cochlear should be used. Non-standard
connecting cables can cause damage to the sound processor and injury to
the patient.
Cochlear is not liable for any damage arising as a result of using incorrect
equipment or incorrect use.
p
WARNING! It is extremely dangerous and potentially fatal to
!
connect any equipment that is plugged into a 110 and / or 220 V
power supply without using the audio adapter.
Maintenance
The sound processor can be worn during waking hours apart from when you
take a shower, swim or engage in physical activity that might damage it. Ensure
that the sound processor is switched off when not in use to save the battery.
At night, and in a clean environment, the box and battery compartment may
be left open to allow any trapped moisture to evaporate.
English
17

Publicidad

Tabla de contenido
loading

Tabla de contenido