Publicidad
Idiomas disponibles
Idiomas disponibles
1
3
2
7 8 9
4
6
6
12
1
11
1
Scope of supply:
1x main silencer holder (1)
1x hex flange screw M8x60 (2)
1x hex flange screw M8x40 (3)
6
1x countersunk screw ISR45 M8x45 (4)
1x countersunk screw ISR45 M8x20 (5)
2x spacer (6)
4
5
- Remove the screw (7), washer (8) and nut (9).
10
- Remove the screws (10) on the left and right and take off the passenger
footrest unit (11) on the left and right.
10
11
- Mount screw M8x45 (4) (25 Nm, Loctite 243) at the top and screw M8x20
(5) (25 Nm, Loctite 243) at bottom with the spacers (6) on the left side.
4
5
- Remove the damping element (12) of the original passenger footrest unit
(11) and mount in the exhaust holder (1) (included).
- Mount the exhaust holder (1) with the screw M8x60 (2) (25 Nm) at the
top and screw M8x40 (3) (25 Nm) at the bottom on the right side.
2
- Mount the main silencer with the original screw (7), original washer (8)
3
and nut (9) (25 Nm).
§
7 8 9
The accompanying parts certificate enables entry into the vehicle papers.
LEGAL REGULATIONS
0025080606
0025080406
0019080456
0019080206S
62603061000
Publicidad
