J5create JUA210 Guía De Instalación Rápida página 6

DEVICE HARDWARE INSTALLATION
1. After the computer has rebooted, connect the external display device to the VGA/DVI/HDMI connector of the
USB Display Adapter.
2. Connect the USB Display Adapter into a USB 2.0 port on the host computer.
3. Software processing will take a few minutes. After the software processing is complete you will be ready to use the
USB Display Adapter.
*Multi-USB Display Adapter Installation
If you are going to install more USB Display Adapters, please repeat the hardware installation and then reboot the
computer.
All manuals and user guides at all-guides.com
4