Publicidad
please note, the camera will record when the engine runs only. Key position "Ignition" will not start the camera.
Error
Cause
Display does not show anything, Green
Bad contact between base plate and camera
adaptor LED is blinking.
Display does not show anything, Green LED is
No power at the socket.
not blinking
Fuse in the Adaptor melted
Display is showing turning bars, but no file at
The battery inside the adaptor has not been
the card
charged.
The Video jerks when playing at the PC.
The card, the USB connection or the PC is
too slow
The video is turned 180°
Wrong Settings
Date and time will not be displayed in a correct
Wrong Settings
way
Display shows „ER"
The camera cannot get space – too many
small files.
Display shows „MF"
No more free memory left. „MF" = Memory
Full
Trouble Shooting
Solution
Clean the contacts with blue rubber, check the
position of the contacts
Replace car s fuse
Replace adaptor s fuse
Connect the adaptor without camera only and
charge the adaptor while driving
Download the file to the PC first.
Stop other applications.
Read „ 180° turn"
Read „ Timestemp" and „ Synchronize
Timestamp"
Download the file to the PC first. Format the
SD-Card.
Download the file to the PC first. Format the
SD-Card.
Publicidad
