Operation∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 - Royal Sovereign RBC-1100 Manual Del Proprietário

oPeRAtIon
1. Plug in power cable and turn power switch on.
2. Select counterfeit detection mode.
ultraviolet Counterfeit Detection
Use UV counterfeit detection to detect fake bills. To use UV press the UV button and the UV indicator light will turn on
showing that the function is on. When the machine finds a fake or suspicious bill the machine will stop and the preset
display will show the error code. Remove the bill and press reset to begin counting again.
The level of sensitivity of the UV light can be adjusted. To enhance UV detection, use a flat-head screw driver to turn the
UV sensitivity adjuster on the back of the machine clockwise. To turn the UV off and count without counterfeit detection,
press the UV button. The UV indicator will turn off showing that the function is not on.
3. Select functions.
Common counting mode
Use this mode to count all of the bills placed into the hopper. To set the machine to common counting mode, press the
preset button to clear the preset display. Once bills are placed into the hopper the machine will automatically begin
counting. The number of bills counted will be shown on the count display. When you remove the bills from the stacker
the count display will reset to 0.
Batch counting mode
Use this mode to count bills into batches. To set the machine to batch counting mode, press the preset button until the
preset display shows 000. Press the +1 and x10 buttons to reach the desired batch amount between 1 and 999. Once
bills are placed into the hopper the machine will automatically begin counting. When it reaches the preset batch amount
the machine will stop. Remove the batch of bills from the stacker and the machine will begin counting the next batch. If
the quantity of the remaining bills in the hopper is less than that batch amount you will need to place more bills into the
hopper to finish counting the batch. To stop using batch mode press the preset button to clear the preset display.
Accumulative counting (ADD) mode
Use this mode to add the quantity of bills counted to get an accumulative total. To set the machine to ADD mode, press
the ADD button. The ADD indicator will light showing that this mode is turned on. Place bills into the hopper and the
All manuals and user guides at all-guides.com
8