Set-Up; Checking The Product And Package Contents; Basic Cleaning; Product Assembly - Medion MD 22800 Manual Del Usuario

Set-up

Set-up

Checking the product and package contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the product.
− For this reason, be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see chapter "Scope of
delivery").
3. Check whether the product or individual parts are damaged. If this is the
case, do not use the product. Contact the manufacturer via the service
address indicated on the warranty card.

Basic cleaning

− Remove the packaging material.
− Clean all parts of the product before fi rst use as described in the chapter
"Cleaning and maintenance".

Product assembly

1. Choose a suitable location to set up the product.
Your room layout or personal preference will dictate which location is
suitable. Take into consideration the size and position of your screen, the
location of a suitable power outlet, as well as the location and distance
between the product and the rest of your equipment.
2. Place the projector
towards the direction you want to display the image to.
3. Connect the external power supply
projector.
4. Connect the power cord
5. Connect the plug of the power cord to a wall outlet.
The front light
projector illuminates red.
The product is now in standby mode.
12
4
on a flat and stable surface with the lens
9
to the external power supply.
5
illuminates blue and the indicator light on top of the
10
to the power input at the rear of the
7
facing