Positioning Options - Medion MD 22800 Manual Del Usuario

Positioning options

The product can be installed in four different configurations.
Orientation
Front Table
Front Ceiling
Rear Table
Rear Ceiling
• If you want to install the product upside-down onto the
ceiling, ensure that the ceiling provides the appropriate
weight bearing capacity, use an appropriate projector
ceiling mount kit and follow the assembly instructions
carefully.
• Depending on the orientation of the product and whether
it is in front or behind the screen, the projection has to be
adjusted. Please use the appropriate setting in the main
menu "Picture" and sub-menu "Rotate" (see chapters
"Positioning options" and "Using the menus").
Sketch Explanation
Select this orientation with the
product placed near the floor in
front of the screen. This is the most
common way to position the product
for quick setup and portability.
Select this orientation with the
product suspended upside-down
from the ceiling in front of the screen.
Note: A projector mount is required
to install the product from a ceiling.
Select this orientation with the
product placed near the floor behind
the screen.
Note: A special rear projection screen
is required.
Select this orientation with the
product suspended upside-down
from the ceiling behind the screen.
Note: A projector mount is required
to install the product from a ceiling.
A special rear projection screen is
required.
Set-up
13